A scope base adapter rail in stainless silver finish for Ruger rifles listed below that have two Ruger style ring notch cuts. The adapter rail clamps onto the ring notch cuts and allows use of picatinny or weaver style scope rings and also will mount red dot sights with picatinny or weaver style mount. No drilling is needed. The rail has 12 ring slots which make it easier to set up eye relief and find more desired placement of scopes or red dot sights. It also has a see-thru opening that might allow use of iron sights depending on the type of scope or sight installed and models of your Ruger rifles.
Machined from extruded aluminum alloy
Rail type: Picatinny and weaver
Number of ring slots: 12
Overall length: 4 3/4 ”
Finish: Anodized stainless silver
* When mounting the rail onto the rifle, try using the different holes and align the mounting screws to Ruger ring notch cuts for the best fit since the adapter mount is designed for use with different models. Flip the mount from end to end if necessary. Check alignment of the rail to the center line of barrel before tightening the clamping screws. Use blue thread locker on the screw threads and check the screws often and be sure they stay tightened when using.
* Always be sure to unload the chambers and practice safe gun handling when mounting the rail.
* The adapter rail is compatible with Ruger 96/44, M77/22, M77/44, and M77/ML, Mini-14 and Mini-30. Also fits the Ruger 580 Ranch which is the Mini-14 whose serial number starts with 580.
* On some Ruger models, the U opening on the mount might not be large enough to allow the iron sights to be fully visible.